View Single Post
  #6  
Old 12-26-2007, 03:01 PM
Bio300TDTdriver Bio300TDTdriver is offline
Unofficial wormcan opener
 
Join Date: Dec 2005
Location: Ashland, MA
Posts: 2,602
To get a rough idea of how bad the compression might be, try to start the engine without allowing any time for the glow plugs to heat up -- just turn the key and let the engine crank. In 60F weather, my 603 will start after 5 seconds of cranking without pre-glow. If you are in a cold climate, that may not work. I think the 603 came with a block heater installed from the factory; you could use that in a cold climate to warm the engine and then try to start it without pre-glow.


They did come with the block heater from the factory, but the cord was attached by the dealer after delivery. Some have cords attached some do not.
__________________
1987 300TD 309, xxx 2.8.2014 10,000 mile OCI


Be careful of the toes you step on today, as they may be connected to the ass you have to kiss tomorrow. anonymous

“Be who you are and say what you feel, because those who mind don’t matter, and those who matter won’t mind.” Dr. Seuss
Reply With Quote