Quote:
Originally Posted by ctaylor738
There are several good ones. Use the Search feature and also look in the DIY posts.
The main thing is to not bugger the pulling of the pins that hold the slide rails in the head. There is a clever little tool that works a lot better than a slide puller. Like this:
http://www.sjdiscounttools.com/assm0734.html
Where most people have gotten into trouble is trying to pull the pins out with a non-hardened bolt and an assortment of washers. The bolt breaks off in the pin and then you have a much more difficult job to do.
|
I have that tool. But I found the slide puller more effective.