To loosen the nuts on the injectors and the Injection Pump, I use a
17mm flair nut crows foot wrench. using a straight 17mm open end
wrench doesn`t always fit or have the space to swing or turn.

I have replaced the plugs w/o removing the fuel lines.

I agree on the gear wrench. these things are real handy.
Use a little anti siez on the threads of the glow plug when installing.

when installing the wires and nuts, do not over tighten. If you drop one
of the little nuts, you will never find it. I have no idea where they go.

Charlie

__________________
there were three HP ratings on the OM616...

1) Not much power
2) Even less power
3) Not nearly enough power!! 240D w/auto

Anyone that thinks a 240D is slow drives too fast.

80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff

We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works