|
ON that car Closing assist goes like this...........
A micro-switch sends a signal to the door control module, from the door module the signal goes thry the interior gateway(EIS), from there it goes to the PSE system & the pump runs. At that point pressure is fed to a diaphram on the door latch & that pulls the door closed. When the door is closed there is another microswitch that must send a signal back to the door module to close the window.....SIMPLE, right?
What part???? possibly the door latch assembly?
__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
|