View Single Post
  #2  
Old 06-07-1999, 11:38 PM
Benzmac
Guest
 
Posts: n/a
Take notes. If you take out the first bolt on the intake manifold and remove the two clamps from the small hose at the head and cut off the hose it will give you more room to work. Now if you have all 6mm allen boltws the easiest thing to do is to take out the poly belt tensioner to get at the bottom bolt then the water pump will roll out and back in with ease. Replace all hoses and clamps with factory ones.

------------------
Benzmac:
ASE CERTIFIED MASTER AUTO TECHNICIAN
LEAD TECHNICIAN FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM