Quote:
Originally Posted by rebreath
.
Put the tester to the light sockets(both fog and both lights) and only get voltage across drivers side low beam.but when i push the high beams on i get voltage across both sockets.No voltage to fogs from either setting,even with center of knob pulled out(front fogs on) one click.when the stick to turn on highs is pulled(as opposed to pushed) to "flash" the high beams I get nothing anywhere.
|
By design, the fog lamps do not operate when high beams are selected.
The passenger side low beam and both fog lamps are powered through the same fuse. The driver side low beam and both high beams are fused separately.
If an '84 is the same as an '82, fuse F11 would be a good place to check.