Originally Posted by madsen

I had a similar issue with my tranmission line. I just cut out a small section with the hole in it and replaced it with rubber transmission hose. I then wrapped that with a heater hose to protect it from rubbing thru and reattached it to the lower oil pan using a holder designed to hold a garden hose in place.
It is not a problem to replace shorter sections of metal line with rubber hose designed to hold the heat and presure of transmission fluid. I used 2 clamps per side because I had no bulge in thr cut metal line. This was to insure that the rubber line did not come loose.

I had 2 lines go bad on my car and fixed them this way and the fixed was still working 50 k miles later.

JOHN