Last night in class, I was able to grind the valve faces and the seats. I hope to finish the block honing today because my pistons arrived. I have to get the conn rods all the same weight and see if I can get the pistons close as well. They don't have much of a balance pad. I also have my conn rod bearings. Finally, I have to cut the valve seat hole in the head to replace cyl 6's intake seat.
I'll follow up with some pics too, I haven't had a chance to download them.
__________________
Regards
Warren
Currently 1965 220Sb, 2002 FORD Crown Vic Police Interceptor
Had 1965 220SEb, 1967 230S, 280SE 4.5, 300SE (W126), 420SEL
ENTER > = (HP RPN)
Not part of the in-crowd since 1952.
|