This is a good lesson for you (eddie) and all reading this thread. Six (6) posts were 'wasted' b/c you didn't explain it properly in the first post. Plus we have sent three (3) PMs. ====== ALL WASTED!!!!! ========= Maybe you think that we can "osmose" the info but we can't! Ok, enough of the rant!
Yes, it's working fine from your description. When the system has been read, it takes some time for it to re-poll the other modules, so the LED won't flash.
When you tested the h/b reader, you brought up codes that were stored, and reset them. The system will come back. I suggest that you use the car's system to read the Diag Module; and use the h/b reader to read the other pins.
__________________
Regards . . . . JimF
-------------------
'94 S500 Cpe
Visit my Mercedes Web Page
|