Quote:
Originally Posted by kerry
If I'm not mistaken, that bolt takes 200+ foot pounds. You want to make sure it is tight given the problems that occur with the pins on the crank sometimes. MB does sell a tool for locking the flywheel in place while tightening that bolt I think. Don't know if a screwdriver in the flywheel can hold 200+ foot pounds.
At least you're now familiar with the easiest way to loosen it.
|
Great..... 
__________________
-diesel is not just a fuel, its a way of life- 
'15 GLK250 Bluetec 118k - mine - (OC-123,800)
'17 Metris(VITO!) - 37k - wifes (OC-41k)
'09 Sprinter 3500 Winnebago View - 62k (OC - 67k)
'13 ML350 Bluetec - 95k - dad's (OC-98k)
'01 SL500 - 103k(km) - dad's (OC-110,000km)
'16 E400 4matic Sedan - 148k - Brothers (OC-155k)
|