Quote:
Originally Posted by 190jerry
when removing a vb (722.4)...is anything going to fall out?....or worse, jump out and go flying across the room?.........jerry |
Nothing will go flying, but I have had the plastic check valve stick to the plate and pull out of the valve body (this is a small part that is about 3/8"x3/8"x1/4"). The only problem this creates is trying to figure out where it came from!!
If you separate the two halves of the valve body be very careful as there are about 15 balls. Follow the directions in the transmission overhaul manual (search and you will find them on line) and you should have no problem.