Quote:
Originally Posted by rgnprof
I am going to look for a 2 inch gauge this morning...
But, once I get a 'preload' - anywhere less than 3mm - I reset the needle to 0 by turning the gauge around, right? Then when do I know the valve has traveled 2mm?
I tried the preload and the needle went around counter clockwise - needless to say - I'm not getting this...!
ryan
|
When the gauge is reset to zero and the valve begins to move, the needle will start to rotate (should be counter-clockwise). 2mm is .080". Stop and read the crankshaft numbers when the pointer moves by .080" (needle should be pointing at "20")