you will need a flywheel to bolt up to the crankshaft, and a clutch disk to mate to the spline on the tranny input shaft.
some form of clutch actuator will be needed as well. the MB original is hydrolic, so you will need a pedal assembly from a 240 to fit in there.

__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread
"as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do!

My drivers:
1987 190D 2.5Turbo
1987 560SL convertible
1987 190D 2.5-5SPEED!!!

1987 300TD
2005 Dodge Sprinter 2500 158"WB
1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!