Quote:
Originally Posted by fruitcakesa
Tobybul: they are GSP from Advance Auto
Ken300D: Thanks for the ideas. Unfortunately, the nearest MB dealer is 2 hours away. I was thinking about grinding out the center of the spacer enough to slip past the flare on the axle, but again I don't know if that might be a new problem.
|
That is the best idea; the spacer has to sit flat against the axle. You can get other sized spacers but if they do not go flat against tha axle end you still have a problem.
If you can grind it so that it tapers to fit the radius on the axle if possible if not I guess you have to enlarge the hole.