It would be a lot of work but it could be sanded down thinner by hand.
Is the spacer made of soft or hard steel?
I do not remember how thick the spacers were when I changed my Axles but I do not think they are thick enough that you could hold them and use a belt sander to sand them down.
Perhaps the spacer could be glued down to a piece of wood and an Orbital Sander or a hand held electric belt sander could be used to grind it down. The Orbital sander I think would be the better choice; less likely to send the spacer shooting off some place.
__________________
84 300D, 82 Volvo 244Gl Diesel
|