Quote:
Originally Posted by Arthur Dalton
If you have CD #1, that is where the ASR/EA schemitics will be found.
As far as codes at 14...My suspect is the ASR is not being powered up so it will have no ASR codes b/c it can not search for them if that system has no power/is not activated.
An ASR lamp should go out after start ..if it does not , then it is not ON...so your wheels spin. Your problem is you have NO ASR Activation.
So, that is why I was checking ASR feed circuit chain.
If one see EA on a schematic.. EA means that schematic is for a system with Electronic Accelerator.
An example of such would be---Schematic 124.0/.2.. ABS System - with/ASR/EA .
Reason being you can have an ABS schematic WITHOUT an EA system.
Your chassis HAS an EA system.
|
your right about the ASR lamp is lit up all the time and the system is not working = Spinning tires.
I would expect that to generate a fault code, but as you say, the faulty part needs to be feed with power to do so.
I will check later on the cornector where the plug from the EA goes to if there is power to bee messured 12 volt i guess.
The CD i got is temperaly gone in the mess
hope i find it later.
I got the impresion that the EA was the electric device that pulls the throtle to rev the engine, but I see now that it might just be a general Headline for a complete system.
But what are the part then called that eletronic pulls the throtle???