View Single Post
  #1  
Old 08-02-1999, 09:47 PM
Bob Cavazos
Guest
 
Posts: n/a
Help!

I was troubleshooting a wiper/washer problem (no squirt).

I had pulled the wiper relay and was looking for voltage from the combination switch, which was good. Turns out the pump is bad. I also was taking some voltage and resistance readings on the relay socket with a digital VM.

When I was finished, the car would start, but won't stay running--acts like ignition is shut off rather than starving for fuel.

All the fuses look ok. All the indicator lights come on with the key. All the electrical "stuff" (radio, lights, etc.)appears normal, and there's plenty of fuel.

Any help you can provide will be most appreciated.

Bob Cavazos
Reply With Quote