I need to plug the banjo that has the three way tee on it? I think i'm going to ask for help from Jeffnlisa i'm new to mercedies and would like a bit of experiance under the hood.
ps i pumped it some more and used a might vac at all the steel injector lines installed new fuel filters and i have the sytem completely back to stock thank you and everyone for the feedback i'm going to check my glow plugs tonight and try to pump it many more times if i pump and fuel comes back up from the pump is something wrong?? I just thought i would ask
Joe
Quote:
Originally Posted by pizzachef
When you install a two-tank kit in one of these Mercedes, you need to re-route the fuels lines at the diesel filters, as well as plug the banjo bolt on top the spin-on fuel filter. Did you do this originally? If so, did you make sure to get it back the way it was?
I agree, it sounds like you have a bunch of air in the lines...you'll have to pump a lot to draw the fuel up to the IP, or use a mityvac on the return line to pull fuel to the pumps.
If you need local help in socal with your VO system (or just mechanic help), a guy named JeffnLisa on the frybrid forums installs VO kits, his email is dandsins (at) yahoo.com |