Thanks EZRider,
As per your recommendation I will lower the backend and take the rear down from jackstands. Then the front only will be raised up on the ramps.
I didn't know what that cap is either. I guess I could just try to see if it will snug down some as maybe the bolts loosed. I don't want to take it off as I don't know. But the oil is coming out from either on the top of the cap that bolts into the block or someplace above it. I was just hoping to get a better idea of possibilities. I have both the MB 110 service manual set as well as the MB 107 chassis manual set. But I could not see in the engine manual this cap.
I might have to try to get a better look to see exactly where it is coming out. I will also double check the oil line but I think that is okay.
|