Quote:
Originally Posted by Putty
My procedure was starting at #6 and pulled the rubber boot off the manifold and jammed the mity vac on it and pumped it up...it would go right back to 0...the same held true all the way up to #1 where this particular line didnt hold at ALL.
Is this one dill of a pickle or what!?
|
You should have pulled the vacuum hose from each individual switchover valve........the horizontal leg........and then run an extension hose to each individual vacuum hose.........and then pumped up the Mityvac on each line to see what it holds.
You're not "pulling the rubber boot off the manifold"...........whatever that means........
You're in a pickle because the procedure is just wrong.