Quote:
Originally Posted by JEBalles
When I turn the input shaft, the output mainshaft turns, but the flange does not. The flange turns in relation to the output shaft, they are no longer connected. It seems like the splines on either the output mainshaft or the flange are stripped. Does anyone know how to take off the flange? Does anyone know what a slotted box wrench is? Does anyone have an exploded view of this transmission?
|
Its "socket" with notches that fits into the flange. I made one from a short section of 1&1/4 pipe, not sure about the size but it wasn't "skookem' enough and didn't do the job. Make one from a 1/2 inch socket of the proper size. Maybe you can borrow one.
__________________
1985 Euro 240D 5 spd 140K
1979 240D 5 spd, 40K on engine rebuild
1994 Dodge/Cummins, 5 spd, 121K
1964 Allice Chalmers D15 tractor
2014 Kubota L3800 tractor
1964 VW bug
"Lifes too short to drive a boring car"
|