Quote:
Originally Posted by hanno
865, anytime. Car is already half apart, interior gutted so it wasn't hard to follow. Is the yellow pigtail in your picture used? I don't remember seeing that (but didn't look for it either). Do your reverse lights work now? I had an issue during a conversion that turned out to be tight mounting of the switch.
|
The new cable is the correct replacement part for the old cable, I double-checked. The pigtail was not used, I have no idea of its purpose.
Bad news is the reverse lights still do not work. I checked the new switch and new cable for continuity and they are good. The reason why I replaced the original cable is there was an intermittant connection. Sometimes the reverse lights would work, other times not. When I removed the shifter boot and wiggled the old cable the lights would work.
I checked the bulbs and they are good. Connection under the dash is tight. Next step is I will check the wiring schematic and perform more troubleshooting.
Hanno, thanks for following up.