View Single Post
  #3  
Old 02-07-2009, 08:48 AM
hookedon210s hookedon210s is offline
Registered User
 
Join Date: Jan 2004
Location: Jacksonville, FL
Posts: 474
Warning: Be very careful when you remove and install the new sending unit. It is very likely that the biodegradable wire harness for this which appears to include the oil level sender and starter has deteriorated and will need to be replaced at the same time. IIRC the wire harness is routed just behind the oil filter housing so you should check the condition of the insulation before proceeding. Mark
Reply With Quote