Quote:
Originally Posted by JollyRoger
Did you perform the DOS command line test dir >lpt1 ? This should be done first before you muck around with the BIOS. Epson is telling you LPT1 / IRQ 7 because that is the default setting for the card. That is the IRQ you should 'assign to legacy device' in your BIOS.
|
From the command prompt:
c:/dir>lpt1
"Cannot find the file specified"
c:/dir>lpt2
"Cannot find the file specified"
I don't want to screw up the BIOS........but I did see something about "legacy device" in the BIOS.