PeachParts Mercedes-Benz Forum - View Single Post - No A/C clutch engagement

waybomb · #6 04-26-2009, 02:07 PM

OK
I cleared them, but still no clutch. Crap, maybe I need a clutch. Damn that's stupid - a belt breaks and I need a compressor clutch.

As for the codes listed in the link in my first thread
1. In-car termperature sensor (with aspirator blower)
2. Outside temperature sensor
3. Heater core temperature sensor
5. Evaporator temperature sensor
6. ECT sensor (Coolant temp.), e.g. 12*5 = 125C
7. Refrigerant pressure in bar, e.g. 12*8 = 12.8 bar
8. Blower control voltage, e.g. 16*5 = 1.65 volts
9. Software status of A/C pushbutton control module
15. Selected in-car temperature
20. Version code
21. Engine Speed (RPM), e.g. 6*0 = 600 rpm
22. Terminal 58d (Bat. Volt.), e.g. 99.0 = 99% of voltage
23. Vehicle speed (Kilometers Per Hour)
50. Not used – 00
51. Number of current slip recognition (poly-V-belt)
52. Number of stored slip recognitions (poly-V-belt)

- my car in question is a 2001 E430. I have more codes than listed - is there a list someplace for my car's CCU?

Thanks!