|
Did you remove exhaust manifold or keeping it on?
If you have the manifold still connected to the head, it's attached to the mounting arm of the engine mount (item #47). There are two bolts that hold this, but I think you'll only need to remove one. They get very rusty though.
If the manifold is off, you may also try to slide the block by taking a pry bar and placing it between the bolt on top of the water pump and the head (iirc there's a slight bump on the head that you can pry against).
Good luck,
bigmaq
__________________
2009 R350, now the daily driver
1980 300SD, was the daily driver
|