Thread: Success!!
View Single Post
  #7  
Old 05-29-2002, 07:38 PM
rob_frick
Guest
 
Posts: n/a
It sounds like you have a bad diaphragm on one of the doors. One way to check to see what door it might be is to start the engine, roll down all of the windows, and lock the doors with the drivers door. See what door hangs up. Then with the engine still running, pull to unlock on each of the other doors (not the drivers door) The lock that you can easily pull up on is likely the culprit. I have used this method with success. Once you have narrowed down what door it is, then proceed to removing the door panel. I must say that I have become quite proficient with removing them. I can usually remove a panel in less than a minute. Good Luck ! Let me know what you find.

Robert
Reply With Quote