Quote:
Originally Posted by charmalu
Here is the sanden mounted on the engine when I found it.
hope these pictures work
Ok I got one to come up, back to the drawing board.
|
that wont work on my 77 block since there are not holes drilled in the casting of the lowerblock. Ive tried putting a GM compressor with the bracket but theres no holes drilled in the casting of the lowerblock.Need something else.
__________________
1986 300SDL, 211K,Dealership serviced its whole life
1991 190E 2.6(120k)
1983 300D(300k)
1977 300D(211k)
|