View Single Post
  #8  
Old 09-12-2009, 04:26 PM
mgburg's Avatar
mgburg mgburg is offline
"Illegal" 3rd Dist. Rep.
 
Join Date: May 2006
Location: Onalaska, WI.
Posts: 221
Quote:
Originally Posted by Matt L View Post
After the crack filler, do you then use a standard sealer on top? And how about sand for a filler? ... If you can't guess, I too have a driveway that needs some attention.
That's what I did...filled the crack up to the point of being able to use the bottle-stuff...just like the directions said.

Using "stuffing" didn't make any sense to me...I just put back in the crack what had come out...sand/dirt...but more sand than dirt.

After the filler had some time to setup, then I did the whole driveway with sealer...that made everything "blend in" better.

Would I do it again?

If I was 25 years younger...and a little more brain-damaged...

There was a lot of time invested (not counting the seal-coating)...if I remember correctly, it ran me (just the crack-fixing), out of pocket, about $90 for material...time was 5 days and ALOT of time at the sink cleaning up...that ch!t doesn't come off your hands too easily...
__________________
.

.
M. G. Burg
'10 - Dakota SXT - Daily Ride / ≈ 172.5K
.'76 - 450SLC - 107.024.12 / < .89.20 K
..'77 - 280E - 123.033.12 / > 128.20 K
...'67 - El Camino - 283ci / > 207.00 K
....'75 - Yamaha - 650XS / < 21.00 K
.....'87 - G20 Sportvan / > 206.00 K
......'85 - 4WINNS 160 I.O. / 140hp
.......'74 - Honda CT70 / Real 125

.
“I didn’t really say everything I said.”
. . . . . . . . . . . . . . . . . . ~ Yogi Berra ~
Reply With Quote