Quote:
Originally Posted by tangofox007
The light is controlled by a relay which measures the balance of the current to the #1 glow plug versus the combined current to the remaining plugs. Except for the #1 plug, it is possible that one failed plug will not be detected. According to the FSM, the failure of the #1 plug or any two other plugs is guaranteed to provide a proper light indication.
|
Hmmmm . . .that kinda makes sense, but on my setup, I'd think it was #4, not #1, as 1-3 seem all connected together in the relay harness . . .
Read my original post . . . could it be differnt on the 240/616?