View Single Post
  #2  
Old 06-20-2002, 06:57 PM
engatwork's Avatar
engatwork engatwork is offline
busy
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 11,776
If you can do wheel bearings you can do a front it. Pretty straightforward job. Alot of grunt work. Make sure you have the proper tool or pay an independent to press the new ball joints in. You don't need the spring compressor unless you replace the track rod mount which unless it is really, really shot you don't have to.
__________________
Jim
Reply With Quote