The GP check was... All of them have power, and I ohmed them all, but they were all connected, and maybe I missed a bad one, last time I disconnected the plug at the GP controller and ohmed from there.

How can I tell if 2-3 are firing? and just not making the engine run? It smokes so I have fuel. And it tries a couple of times to fire, then it just spins. I also know nothing about the fuel that is in the car. Maybe I should fill the filter with known good fuel, and draw from a can. But with the smoke, would that indicate that the fuel is trying to burn and is ok?

The engine was moved complete, I removed the starter from the block, but never disconnected it electrically. Everything else was left on the engine, except the fan. So I figured it was not a timing issue, but could I have moved the pump by hitting something? I figured they were hard to move, I have never adjusted one.

__________________
83 300SD Dark Silver Dark brown inside