Yesterday, while diving home, I noticed the right side turn signal falsed a few times then died. I tried the left, and it was dead as well.

I do know that the hazards and turn signals are tied together.

So, after trying the signals again, I turned on the hazards, and they worked, and the turn signals began working again. A few miles down the road, again no turn signals, but when I pressed on the hazard switch they came back to life.

This morning all was working again.

I'm thinking to be safe to replace the hazard switch and the flasher relay, as the both are 28 years old.

What do you giys and gals think?

Thanks!

__________________
RRGrassi


70's Southern Pacific #5608 Fairmont A-4 MOW car

13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete.

91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K

90 Dodge D250 5.9 Cummins/5 speed. 400K