View Single Post
  #20  
Old 12-16-2009, 01:10 PM
charmalu charmalu is offline
Registered User
 
Join Date: May 2007
Location: Out in the Boonies of Hot, Dry, Dusty, Windy Nevada
Posts: 9,680
Here is another thing about metal Ready and Marine Clean.

Quote: "Does metal that`s been cleaned with marine Clean have to be treated with Metal Ready rust remover/preprimer before gas tank sealer or POR-15 rust preventative paint can be used"?

YES. Marine Clean is a powerful caustic solution that leaves an alkaline finish on metal. An acid finish takes paint better because it etches the metal and gives it a surface profile with "tooth" and the proper PH for adhesion. Our metal Ready rust remover/primer is the perfect prep to use on any surface that`s been cleaned with Marine Clean first".

Now what you are going to do is sand it smooth first. I think if you use marine Clean to wipe it down, you should use a cloth with clean water to wipe up any residue the MC might leave. You wouldn`t have to use the MR, since it is for bare metal/rust.

OK, now we need pictures, this group lives for pictures.

Charlie
__________________
there were three HP ratings on the OM616...

1) Not much power
2) Even less power
3) Not nearly enough power!! 240D w/auto

Anyone that thinks a 240D is slow drives too fast.

80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff

We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works
Reply With Quote