The SDL has a firewall a few inches forward of the fuse box and there is a grommet box with spare openings to install new wires. The FSM indicates the aux. fuse kit installation remain on the fuse box side of the firewall. I elected to leave my aux. fuse on the engine side of the firewall the same as what Jeremy did. Its easier to check the fuse.
So I took both wires through the firewall grommet and the fuse box grommet. Its neat that the fuse box grommet blocks just slide in and out, makes it real easy to push the wires through, then slide it back in place. The picture shows it removed and back in place. That grommet cap I removed at the beginning holds these blocks in place.
I plan to ziplock my aux.fuse box to something just forward of the firewall and I'll add pictures when its done.
Thanks
Harry
|