Quote:
Originally Posted by konstan
Hahahaha "no one will ever know what you are talking about". That's some funny stuff right there...
Ok here is my outline of next steps, then, please let me know if you have any corrections to this plan
1. remove the oil pump
2. open up the 1st bearing, inspect, plastigauge it (find who sells plastigauge)
3. remove the head
|
The snap-on truck has them for about 30.00. That's where I got mine.
I'm sure you've already figured you have to get the oil pan off to get to the final 3 rod caps. You can get to the first two off without taking the main oil pan off though.
When you go to remove the head, make sure you you get the couple allen-head bolts that are in the chain galley. I didn't see those and I was stumped on what was holding it in.