Thread: Quiz
View Single Post
  #7  
Old 06-02-2010, 09:07 PM
daddi daddi is offline
Starstruck
 
Join Date: Mar 2009
Location: Iceland
Posts: 423
Answers.

Quote:
Originally Posted by mgburg View Post
My Guess: You have a camshaft position sensor (or timing sensor) that's either loose or is dying, thereby causing the erratic idle and "in gear" situation. Wrong. If a camshaft position sensor fails you get slower take off because of no timing advance. Hint: The problem changes if you move the air mass sensor around.


My Guess: The part which might be broken is an "oil supply" seal galley that is adjacent to the water jacket...since the oil supply would be at a higher pressure to force the oil into the water/coolant galley, which is at a lower pressure. Correct


My Guess: #1.) Plugged/clogged fuel injector -or- #2.) Bad plug wire. Partially correct. It was a bad plug feed wire plastic insulation broken.

Did I win?
Second part later.
__________________
600SEL '91
300E 4Matic '88
240D '83
280SE '77
350SE '73
The most complex systems can fail in the simplest way.
Contra verbosus noli contendere verbis, sermo datur cunctis, animi sapientia paucis.

i don't believe in the lord! He's never bought me a Mercedes Benz.
Reply With Quote