Quote:
Originally Posted by HTN-E430
My 2000 E430 had Brake Light, ABS, BAS and ESP lights on. After some searching I think the Brake Light Switch had gone bad, I bought the switch but could not find it anywhere near the top of brake or gas pedals. The only I found is a black oval about 1" in diameter on top of the gas pedal, I removed the cover and found nothing under it.
Does anybody has a picture of where is this Brake Light Switch located in 2000 E430 ?
|
To remove the Brake Switch:
I found it best to put the seat right back and lie almost on your back on the floor. The switch is located above the brake pedal at the back. On the top of the brake switch in the 12 o'clock position, there is a little plastic catch, which you need to depress and then at the same time turn the switch clockwise a quarter of a turn. You may find it easier to unplug the two wires first. Once turned, you can remove the switch.
Pay attention to the length of the actuator (plunger),as it is on a ratchet system and your new switch needs to be the same length, otherwise it will not operated properly.
Use an original Merc brake switch and just rotate the switch anti-clockwise this time to fit back in the mounting.
Good luck, and I hope it fixes your car.!
