They tell me a hub puller is needed but, I've never had to use one. However you will need a pair of large, long tip 90 deg snap ring pliers to remove the snap ring holding the coil to the compressor.

Make sure on assembly that you set the gap properly, the shims are at the end of the shaft and some will get hung in the hub.



Joe

__________________
Project Smoker, '87 603 powered wagon
Hauler, 96 CTD can you say torque?
Toy 73 Cougar xr7 convertible
Acme Automotive Inc.
Raleigh NC
919-881-0364