View Single Post
Old 08-01-2002, 08:20 AM
mbdoc mbdoc is offline
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
There are 2 different types of this clutch. On some there is a 12mm wrench(socket) nut that secures the "follower" to the compressor: this type requires a special puller to remove.
The other type has a 10mm wrench(socket) bolt that can be removed without any special puller.
On any of the clutches you will need a GOOD set of snap ring pliers.
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote