Thread: code issues
View Single Post
  #6  
Old 06-28-2010, 04:00 PM
nucor nucor is offline
Registered User
  
Join Date: Jun 2008
Posts: 81
Quote:
Originally Posted by deanyel View Post
The pushbutton/LED on the ancillary 8 pin plug is the DM / diagnostic module, which is also on pin 19 of the 38 pin. Look up the DM codes and other codes for a 124.034 at the link below:

http://www.motodok.com/Documentation/Files/MB/cs1000-mb.pdf
deanyel i check the codes on page 45,46 it state if i readed it right

20= ignition control module dtc memory faulty
19= ground, coding from left ezl/akr ignition control module not present
17= crank shaft position sensor faulty
6= camshaft position sensor faulty
4= load sensor in eal akr control module faulty


what do i need to do or did i ready it right. could some one help me with this issue
Reply With Quote