Here is a thread where I posted some pictures of a Sanden Compressor I found on an old Euro 123 in PNP.

I have the brackets etc to mount it on a 617.962 eng. but the Sanden bracket I have only uses the 2 forward mount holes on the side of the eng block the R-4 uses, not the third rear mount.

The Sanden also mounts on the front of the block just under the vacuum pump, where there is a threaded mount hole that the 617.952 does not have.

I think the eng I pulled the bracket off of was a 617.912.

Alternative compressor and/or mount for the Euro w123

about 4 months ago I found another bracket, this one is made of steel and the one above I listed is made of aluminium.
this second one is mostly there, but does seem to be missing some parts.

Charlie

__________________
there were three HP ratings on the OM616...

1) Not much power
2) Even less power
3) Not nearly enough power!! 240D w/auto

Anyone that thinks a 240D is slow drives too fast.

80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff

We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works