OVP diagnosis also usually shows an ABS lamp on.

For your reference [ and cuz the OVP is another troublesome part on your model that has been up-graded], it is located behind the plastic pop- off panel behind the battery-- tall , aluminum can /fuse on top- one screw on the side for removal..

Check the part #
Old # 000 540-67-45
New- 000 540-52-45

Worth changing due to fail rate and low cost..

Other possible is the original wire harness should be checked for poor insulation- another up-grade...

Both of these are not "will they fail", but "when"