View Single Post
  #6  
Old 09-06-2002, 01:37 PM
moedip
Guest
 
Posts: n/a
Sorry - misunderstood - I thought the relay only ran hot AFTER you removed it. If you are not getting spark - check voltages in ignition circuit. Check if you are getting 12 volts to the coil - if it is missing - back track it to find out where it disappears from. I have had fuses that were corroded on the end which caused no power while looking good. Maybe the jolt of taking the relay out caused a corroded fuse end to break connection while looking good. Check which fuse supplies power to your ignition system and see if you have 12 v at the output of the fuse and go from there. A circuit diagram will make this extremely a lot easier.
Reply With Quote