I dug out my Craftsman ratcheting jack stand and gave it a close look and a quick test. Mine is the 3 ton and I assume the 4 ton is of simillar design. I raised it halfway, crouched, stood and balanced myself on it, reached down and yanked upward on the handle. To my surprise, it (and I) dropped all the way to the bottom! That was very sobering! Jack stand with pins will never do that! I was expecting it to catch on the next tooth on the rack but not so. The handle only needs to be raised upwards 3/4" to release the rack for it to drop. I'll try to find the owners manual and see what warnings/ instructions are provided.

With the car's weight (let's say 3000 lbs) on the jackstands, how much force is required to hit the handle at such an angle and cause it to go up 3/4"? Any mechanical engineers here want to take a stab at it? The jack release handle is 4.5" long.

__________________
85 300D turbo pristine w 157k when purchased 161K now
83 300 D turbo 297K runs great. SOLD!
83 240D 4 spd manual- parted out then junked