Thread: I needed a hitch for my 300SD so I used a curt 11805
View Single Post
  #2  
Old 04-24-2011, 09:40 PM
LuckyEddie's Avatar
LuckyEddie LuckyEddie is offline
Registered User
  
Join Date: Mar 2008
Location: Wilmington, NC
Posts: 202
More pictures
I think that it will do fine. I saved the numbers that I used to drill the supports if anyone is interested, Get it soon I am going on vacation for a while.

Good luck
Robert

I just put up a drawing of the end piece hole pattern. If I were making this from scratch I would use a three inch hole on center line with the single hole instead of the notch. I also cut 4.25 off the bar that has the welded nuts on them. I used this piece to reinforce the two bolts that come from the bumper mount on the outside. The next one that I make I will have a jig to speed assembly up.

The picture is on the right but it is dimm. The numbers are - up 1.355 and down 1.393 and 4.62 across
Attached Thumbnails
I needed a hitch for my 300SD so I used a curt 11805-img_0468.jpg   I needed a hitch for my 300SD so I used a curt 11805-img_0469.jpg   I needed a hitch for my 300SD so I used a curt 11805-img_0470.jpg   I needed a hitch for my 300SD so I used a curt 11805-img_0471.jpg   I needed a hitch for my 300SD so I used a curt 11805-hitch.jpg  

__________________
84 300SD 84 300CD 85 300SD 85 300CD 98.5 Dodge 2500 Cummins 99 Dodge 2500 Cummins 90 Jeep for the sand Wilmington, NC
Last edited by LuckyEddie; 04-26-2011 at 10:42 AM.
Reply With Quote