What I am going to do is make a 617 injector look like a 60X injector. To do this, I will first machine off the 617 threads. Then I will cut new threads into the injector body at the tip, just like the 60X injector.

For the PC, I will make the injector area solid, and machine in new injector threads on an angle, and of coarse a new seat for the injector heat shield to seal against.

When finished, the injector will thread into the angled PC. I will need to modify the 617 lock collars, or buy 60X collars for installation.

I wish I knew what the language spoken in the link. I would like to understand how the duel stage injector works and what the differences in the internal parts do to the operation.

I am really considering going with dual stage injectors on the next 10mm MW I build and would like to have a better understanding of how they work to determine if they will do what I want. I have been very pleased with the modified injectors in the Gen I 10mm set up, but I am curious if there are improvements that can be had with a dual stage injector.