It is repairable. Use a rubber vacuum line larger than the opening. Using a razor blade cut a shallow grove in hose. Using a pick or similar instrument push the hose in the reg. until it seats into your groove. There isn't any pressure that hose sees so it would just need to seal fuel against gravity. Then only in case of regulator failure, which is quite rare.
__________________
90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start
90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff
|