View Single Post
  #13  
Old 09-01-2011, 07:28 PM
speednjay speednjay is offline
Registered User
 
Join Date: May 2010
Location: BAKERSFIELD, CA
Posts: 1,466
Quote:
Originally Posted by KarTek View Post
Check for vacuum at the wastegate. There should be full vacuum (or close to) at idle. If you don't have vacuum there, try swapping the wastegate and EGR transducers (they're the same) and see if you either get a code or it starts working again.

There are two paths to check on in this situation:

One, the turbo actually isn't boosting and two, the ECU isn't seeing the boost that's there and not fueling for it.

For emissions/anti-smoke purposes, the ECU will only fuel the engine beyond a certain extent until it sees about +3# of boost.
ok switched the transducers and got 2 codes ..0100 and 02xx i forgot exactly. so does this mean that its probably the transducer? there is vacuum at going into the wastegate transducer and egr transduce
__________________
1993 e300
1995 e320
1994 e320
2006 s500 4matic
2004 Jeep wj overland
2001 Ducati 748
2004 Honda shadow aero

Last edited by speednjay; 09-01-2011 at 08:09 PM.
Reply With Quote