I hope some of you guys subscribed to this thread. So I replaced the ignition switch, it wasn't the easiest thing. When i had the instrument cluster out and the underneath padding removed, I installed the new ignition switch and reassembled the ignition unit. I then hooked up the battery to test the ignition set up, the car fired right up and air was blowing in my face!!! So i jumped for joy and WAS really happy. Then I reassembled the instrument cluster and put everything back into place. Went for a test drive and no blower motor . I'm so upset! Also this car use to have running lights on at all times along with the instrument cluster illuminated, but now I have to turn it on manually with the switch on the left, any ideas as to why that happened? and why or what I should do about the blower motor? Thanks